Pedestrian Crossing Light

Short Description:

1. It is used for the traffic control of non-motor vehicles in non-motor vehicle lanes, and the bicycle symbol is more intuitive.

2. The light source adopts bright LED, constant voltage and constant current power supply, reducing attenuation.

3. The whole lamp has a long service life, anti-vibration and anti-wind pressure.

4. The product has passed the inspection of the Traffic Safety Product Quality Supervision Center of the Ministry of Public Security.

Send email to us

Product Detail

Product Tags

Set Conditions

1. Pedestrian crossing light setting at the intersection

The setting of pedestrian crossing light at the intersection shall comply with the provisions in 4.5 of GB14886-2006.

2. Road section pedestrian crossing light setting

Pedestrian crossing light shall be set when one of the following conditions is met on the road section where the pedestrian crossing line has been drawn:

a) When the peak hour flow of motor vehicles and pedestrians on the road section exceeds the specified value, pedestrian crossing light and corresponding motor vehicle signal lights should be set;

Number of lanes	Motor vehicle peak hour traffic flow on the road section PCU/h	Pedestrian peak hour traffic Person-time/h
＜3	600	460
	750	390
	1050	300
≥3	750	500
	900	440
	1250	320

b) When the average hourly traffic flow of motor vehicles and pedestrians for any continuous 8 hours on the road section exceeds the value specified in Table 2, pedestrian crossing light and corresponding motor vehicle signal lights shall be set;

Number of lanes	The average hourly traffic flow of motor vehicles for any continuous 8 hours on the road section PCU/h	The average hourly traffic flow of pedestrians for any continuous 8 hours Person-time/h
＜3	520	45
＜3	270	90
≥3	670	45
≥3	370	90

c) When a road section traffic accident meets one of the following conditions, pedestrian crossing light and corresponding motor vehicle signal lights should be set up:

① If there are more than five traffic accidents per year on average within three years, analyze the road sections where accidents can be avoided by setting signal lights from the analysis of accident causes;

② Road sections with more than one fatal traffic accident per year on average within three years.

3. Pedestrian secondary crossing signal light setting

At intersections and pedestrian crosswalks that meet one of the following conditions, signal lights for secondary pedestrian crossings should be set up:

a) For intersections and pedestrian crosswalks with a central isolation zone (including under the overpass), if the width of the isolation zone is greater than 1.5m, a pedestrian crossing light shall be added on the isolation zone;

b) If the length of the pedestrian crossing reaches or exceeds 16m, a pedestrian crossing light should be installed in the center of the road; when the length of the pedestrian crossing is less than 16m, it can be installed depending on the situation.

4. Pedestrian crossing light setting for special road sections

Pedestrian crossings in front of schools, kindergartens, hospitals, and nursing homes should be equipped with pedestrian crossing lights and corresponding motor vehicle signal lights.