Solar yellow flashing lights are a type of traffic light product that uses solar energy as energy, which can effectively reduce the occurrence of traffic accidents. Therefore, yellow flashing lights have a great effect on traffic. Generally, solar yellow flashing lights are installed in schools, turning points, village entrances and other places to warn vehicles on the road. So what are the installation methods of this product? The following is a detailed introduction by Qixiang, one of the famous China traffic light manufacturers.
1. Hoop installation
Suitable for fixed installation scenarios of light poles or columns, such as traffic signal light poles, road guardrail brackets, etc. The lamp is fixed to the column through a hoop, which is suitable for outdoor environments that require obvious warnings.
2. Column installation
Mostly used on both sides of the road or independent light poles, the base needs to be buried in the ground in advance or fixed with expansion screws. Suitable for areas that require a large lighting range or prominent warning effects, such as school gates, intersections, etc.
3. Wall-mounted installation
Suitable for installation on walls or building surfaces, and it is necessary to ensure that the wall has sufficient load-bearing capacity and the sun is not blocked. Suitable for scenes that require concealed installation, such as both sides of urban roads and around schools.
Solar yellow flashing light manufacturer Qixiang recommends:
a. Wall-mounted type is preferred in unobstructed environments to make full use of solar panels for lighting.
b. Column type is recommended in high-traffic areas to enhance the warning effect.
c. Hoop type is suitable for landscape areas without affecting the overall appearance.
Notes
1. The installation location should take into account whether the solar panel can receive sufficient sunlight and ensure that the solar panel is facing the correct direction.
2. The installation height and angle should be adjusted according to actual conditions to ensure that the solar yellow flashing light can play the greatest warning role. The installation height should meet the requirements of relevant standards, and the angle should ensure that the light can illuminate the area that needs to be warned.
3. The solar yellow flashing light should be fixed firmly and reliably to prevent it from being blown down by the wind or damaged by collision. Appropriate screws and fixings should be used during installation to ensure the stability and safety of the lamp.
4. During the installation process, cross-lines should be avoided on the solar yellow flashing light line to prevent interference with the signal collector.
5. During use, check the solar panels and wires frequently for abnormalities.
The shell of Qixiang solar yellow flashing light is made of ABS+PC flame retardant material, resistant to extreme temperature changes of -30℃~70℃, IP54 grade, equipped with 23% efficient photovoltaic panels and ultra-long-life lithium batteries. Please rest assured to choose us, we are online 24 hours a day, and feel free to contact us for more information.
Post time: Jul-02-2025
